
HELLO,WELCOME TO Dingxin Technology (Shenzhen) Co., LTD WEB
Technical features:
* After the central station is turned on, no complicated system configuration is required. After the site is turned on and powered on, the network will be automatically formed, and the communication can be launched in "seconds";
* Arbitrary topology, multi-hop relay, relay and forwarding;
* The logical attributes of each node can be flexibly configured;
* At present, the same frequency network can support the interconnection of 1024 nodes;
* The channel uses AES encryption;
* The peak system data bandwidth is 32Mbps;
Equipment technical parameters:
1) Technical advantages
l Multiple relay hops: The data relay hops can reach 16 hops, which expands the network coverage and increasesStrong applicability of network applications;
l Software architecture: a centerless, distributed wireless self-organizing network based on the IP system;
l Anti-multipath interference: TDD-COFDM multi-carrier modulation has strong resistance to multipath interference;
l Diffraction ability: strong diffraction and penetrating power;
l Dynamic routing: Layer 2 intelligent routing protocol;
l Flexibility: Strong scalability, nodes can be added and exited dynamically;
l Mobility: The maximum mobile speed of the tested node is ≥4000 km/h;
l Anti-destruction and self-healing: individual terminal damage will not affect the normal operation of the network, and has a strong anti-destruction ability;
l Working mode: star network, chain network, point-to-point, point-to-multipoint, multi-point-to-multipoint;
l IP transparent transmission: support IP transparent transmission from network port to network port, network port to serial port, and serial port to serial port;
l Internet expansion: effectively extend the coverage of the Internet, any terminal in the network can be used as a gateway, and each node of the network can access the Internet through the gateway node;
l Map display: Support map location display under the condition of external GPS/BD;
l Configuration management: the radio channel, bandwidth, power, speed, IP, key and other parameters can be set;
l Status display: can dynamically display network topology, link quality, signal strength, environmental noise, etc.;
Performance parameters:
l Network scale: single frequency supports 1024 nodes;
l Communication frequency: 1415~1465MHz (2.3G\2.4G), 1MHz step adjustable;
l Transmitting power: 2*30dBm (2*1W), 1dBm step adjustable;
l Bandwidth mode: 4/8 MHz;
l Modulation method: multi-carrier TDD-COFDM;
l Carrier modulation: BPSK/QPSK/16QAM/64QAM (adaptive or fixed);
l Receiving sensitivity: -110dBm @ 1MHz;
l Transmission delay: about 2ms per hop;
l Start-up time: point-to-point, point-to-multipoint ≤5S (AD-Hoc startup time 25S);
l Network access time: less than 1 second;
l Route switching: less than 1 second;
l Data interface: network port x 2, RS232 x 2;
l Battery power supply: 12V/1A;
l Power consumption of the whole machine: 6~12W, standby 6W, receiving 8W, full load sending 12W;
l Protection level: IP65;
l Working temperature: -40~+70℃;
l Dimensions: Length: 73mm*width 47mm*height 10mm;
Copyright © Dingxin Technology (Shenzhen) Co., LTD 【Backstage management】